| Brand Name: | JFDL Position Light |
| Model Number: | WG9925720044 WG9925720046 |
| MOQ: | 100 pcs |
| Payment Terms: | T/T,Western Union |
| Parameter | Description |
|---|---|
| Function | Rear side position lamp (also known as rear outline marker lamp), used to indicate the height and width of the vehicle at night or in low visibility. |
| Side Identification | WG9925720046: Right Hand (RH) WG9925720044: Left Hand (LH) |
| Rated Voltage | 24V DC (Standard for heavy-duty commercial vehicles) |
| Light Source | High-brightness LED (energy-efficient, long lifespan) |
| Lamp Color | Typically red (for rear side marking); may vary based on local regulations and installation position |
| Housing Material | High-transparency Polycarbonate (PC) with UV-resistant coating |
| Base Material | Engineering plastic (heat-resistant, durable) |
| Wiring Harness Length | Standard: ~1200 mm (custom lengths may exist in special batches) |
| Connector Type | OEM-specific waterproof plug (typically 2-pin) |
| Ingress Protection (IP Rating) | IP67 - Dust-tight and protected against temporary immersion in water up to 1m for 30 minutes |
| Operating Temperature Range | -40°C to +85°C (suitable for extreme climates) |
| Vibration Resistance | High - Designed for long-haul trucking and rough road conditions |
| Lifespan | >50,000 hours (typical LED life under normal operating conditions) |
| Original Part | Possible Alternate / Legacy Number | Notes |
|---|---|---|
| WG9925720044 (LH) | WG9925720045 | Some batches may have minor differences in harness length or connector style -- verify physically before substitution |
| WG9925720046 (RH) | WG9925720046 | No common alternate; primary RH part number |
| System Category | Often listed under: "Cab Electrical System", "Exterior Lighting", or "Marker Lamp Assembly" in parts catalogs |
| Brand Name: | JFDL Position Light |
| Model Number: | WG9925720044 WG9925720046 |
| MOQ: | 100 pcs |
| Payment Terms: | T/T,Western Union |
| Parameter | Description |
|---|---|
| Function | Rear side position lamp (also known as rear outline marker lamp), used to indicate the height and width of the vehicle at night or in low visibility. |
| Side Identification | WG9925720046: Right Hand (RH) WG9925720044: Left Hand (LH) |
| Rated Voltage | 24V DC (Standard for heavy-duty commercial vehicles) |
| Light Source | High-brightness LED (energy-efficient, long lifespan) |
| Lamp Color | Typically red (for rear side marking); may vary based on local regulations and installation position |
| Housing Material | High-transparency Polycarbonate (PC) with UV-resistant coating |
| Base Material | Engineering plastic (heat-resistant, durable) |
| Wiring Harness Length | Standard: ~1200 mm (custom lengths may exist in special batches) |
| Connector Type | OEM-specific waterproof plug (typically 2-pin) |
| Ingress Protection (IP Rating) | IP67 - Dust-tight and protected against temporary immersion in water up to 1m for 30 minutes |
| Operating Temperature Range | -40°C to +85°C (suitable for extreme climates) |
| Vibration Resistance | High - Designed for long-haul trucking and rough road conditions |
| Lifespan | >50,000 hours (typical LED life under normal operating conditions) |
| Original Part | Possible Alternate / Legacy Number | Notes |
|---|---|---|
| WG9925720044 (LH) | WG9925720045 | Some batches may have minor differences in harness length or connector style -- verify physically before substitution |
| WG9925720046 (RH) | WG9925720046 | No common alternate; primary RH part number |
| System Category | Often listed under: "Cab Electrical System", "Exterior Lighting", or "Marker Lamp Assembly" in parts catalogs |